Question about Philips Televison & Video
tv. The dvd and vcr show in black and white but on other recorders the dvd and vcr plays back in color. siri, for the black and white screen output of your DVD and VCR. 1) for DVD player: using remote
Question about Wanlida Group Televison & Video
...1 click SETUP(left just below the four arrow w/ enter button in the middle) 2 click DISPLAY set tv system to AUTO tv image to 16:9 WIDESCREEN video setup (depend on the connection) s video or ...
Question about Toshiba Televison & Video
Auto setup only works the first time you power up. I want to setup again. How do I do that? Go to screen set and reset the tv again, then start over
...Auto Clock Adjustment Preparation: ? Turn ON the TV and select the corresponding video input. ? Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.) 1. Connect the ...
auto time sensing through the cable tv input. So, my advice - always be in RF mode (CH3 or CH4 depending on what you have the SLV-D300 set to) if you want to set the clock. Note*** Yes, I agree it was
...TV and set it to the video input mode. ? Select ?CLOCK? from ?SYSTEM SETUP?. For the procedure, see steps 1 to 3 in ?Using the SETUP MENU? 1 Press SETUP while the DVD and video tape is stopped. The ...
Question about Televison & Video
...TV if you want to retune the channels after this initial power on setup I just mentioned above. in the menu options under the channel box on the right hand side of the menu options. there is an auto ...
...TV antenna for the auto clock function to receive an atomic clock pulse. After a few seconds (sometimes minutes) it will display the correct time. Once the time is displayed you can disconnect the TV ...
...tv to auto and this will keep all picture inputs to origional format. I.E. if it was recorded in 16:9 it will play in 16:9. You could set the tv to 16:9 but it will distort the picture on 4:3 ...
Question about Apex Digital Televison & Video
...video, (RCA), SVideo, Component Video, RGB, VGA, and Progressive Scan. For the Onyx DVD player, press "Setup" on the remote control, in the "system setup" tab, choose "tv system," then choose
99 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions