Panasonic DMR-EH57 HDD Recorder Player "auto channel setup" Questions

...and press ENTER.You are finished with the setting. To restart the auto set up PRESS and HOLD channel UP and Channel DOWN button untill auto set up screen apears.Make the changes and press ENTER ...

...the antenna in is connected and the setup program is run to auto tune channels no channels are found. Have you set the Sanyo to "antenna" or to "cable" ? If you've tried one setting, try the

...Auto channel search is complete make sure the Channel source is set appropriately (TV or CATV) by pressing up and down arrows and chossing the correct source by pressing the side arrows using the ...

Unable to tune channels When in setup use auto programming to pick up channels but am not getting any at all. Can you help?? Hi Andrea Try install attenna prior doing some auto programming.

...channel signal is effective for auto clock setting. The unit receives the clock data at 12:00 A.M./P.M. from the PBS channel when the power is off. 1 Press [SETUP] and use the up and down arrows to ...

...channel. Have cleared all timers (there was only one), and using setup have auto programed channels and even added channels manually. Still cannot change channels. Interestingly, when manually adding ...

...picture with white dots running through. Can someone help? Go to the menu. Select "setup". Then "Channel". Let Auto Channel Memory record your channels. I had the same problem and this worked for

...channel setup- I can't find anything like that in the Menu. I've tried the setup with no input as well and it still insists that it's getting a Cable signal. it's saying that because the antenna is ...

...auto search for channels, it only does up to channel 125, however I have over 200 channels and I cant record on a channel higher than 125. What am I doing wrong. It will not let me put in the channel ...

...initial power on setup I just mentioned above. in the menu options under the channel box on the right hand side of the menu options. there is an auto scan option but only if the input source is on ...