LG 42PC5DC 42 in. Plasma HDTV "remove back panel philips" Questions

...from the outer back casing and remove the casing. The control panel is held in by two screws. Remove the screws and re-position the control panel. If the control panel is damaged it can be

...like to know how to remove the back panel of this TV so I can replace the IR Sensor board. Philips 47PFL6704D/F7 put face down on blanket or such remove screws arround edge at back probly torx ...

...work when I turn tv back on something problem with your connection from cable to tuner, if in good contact. you need to remove back cover and re solder tuner ckt board side. specially in 32 pin

...back of your tv remove the screws holding it in place, reach the old lamp firmly and slide it out. 2. Remove the new lamp from the packaging be careful not to touch the lens with a bare finger. Doing ...

...back panel to find i had 2 bulged capasitors (10v 3300uF 105'C) I removed the bad caps and soildered 2 new caps in. i am now getting the front panel l.e.d. to blink 4 times. i do not know how to ...

...you set uses a LC470WUE-SAA1. I would suggest you double check by removing the back cover of the set. On the back of the LCD panel, there should be a white sticker that states the LCD panel model

...if you turn it off & remove back of tv then remove the metal shield (cap) off the video &sound boards it will probally have no more problems then put back on not shield only remove the ...

philips 42 inch plasma 42pf7320a/37 set powers up then shuts down, back cover removed, small circuit board green led flashes 3 times contintually. Thank you My TV this with this . What can be ? Help ...

...have tried to remove the card in the back, didn't help. The model from the back of the TV is 42HFL5860D/27 See if this helps! ...

...screws removed. But won't come off to get at power supply & fuse. In a good number of flat panel TVs you need to remove the base / neck of the TV as well to be able to remove the back of the