Sony KDL-46XBR5 46 in. LCD HDTV "tv screw" Questions

...order from? SONY KDL26S2010 There are 4 screws in Sony KDL-26S2010 that connect stand neck with tv and part number of screws is 258060201 .. SCREW, +PSW M4X12 available in partstore.com for $1.25 ...

...screw does the table top stand take. Lost mine Hi, The size of the screws used for attaching the TV is M6. You can either use M6X12 or M6X16 screws for attaching the TV. You can purchase the cable ...

...off. Check to see if you got all the screws, usually there are 4-6 screws holding the stand in the TV. The are usually all on the center bottom on the back. When the TV is on the floor, try lifting ...

...tv to replace it. I'm an EE so I'll understand the tech stuff. You will need a screw driver, a table. remove all the screws that hold the back of tv in place. replace the ps, reinstall

TV frame and then remove the power supply circuit board. Be sure to avoid touching any large capacitors on the circuit board which can retain a nasty charge even after the unit is unplugged. Then just

...t-con board, but its' not communicating properly. Can you access the menu from the side of the tv using the buttons on the tv? If so, the likelyhood of a bad t-con board are slimmer than if

screw you might have missed. Once the back is off DON'T TOUCH any of the components on the circuit boards. Components like capacitors can still hold a charge when unplugged and you yourself might have

my tv turn red and blink 13 time Hi , I had same problem my TV. Replaced IC8002 on the 'D' board. This is what we did: 1.Bought 2 x MCZ3001D from WES components in Ashfield Sydney Australia for $11.20

dead lcd is not on, no power indicator, properly dead. Sounds like a bad t-con board. Take back off tv. In the top center is a cover with two small phillips screws. take these off and fold cover over.

need mounting screws for sony 46s4100 that are compatible with chief bracket already on wall You should check the disassemble procedure to this set. It will have all details. If you wish to see it, ...