Sony BRAVIA KDL-46W3000 Television "hdmi settings" Questions

just set up the tv... have cable going to hdmi 1 and dvd to hdmi 2... checked all wires, but tv saying NO SIGNAL... wondering what am missing. is there a setting i have turn on for hdmi input On your ...

...use a VGA connection, then you would use a separate audio hookup say from the earphone out on the laptop to the VGA's audio input port on the HDTV. Its all in the settings on the HDMI capable

...I've read the instructions with the TV and the rceiver. The Sony set-up manual says to connect a HDMI cable from the TV's HDMI IN port to the receiver's HDMI OUT port. It also shows a cable going ...

...settings are correct for hdmi.... I have a Sony KDL-46V5100 TV and suddenly couldn't get my PS3 HDMI input on any port. Unplugging the TV and turning it on by holding the power button for 10 secs ...

no sound there is no sound when the tv is in hdmi mode, on tv mode there is sound Check the on screen sound set up to see if the sound for HDMI mode is set for analog output (using RCA Red and White ...

no signal getting a no signal on all my hdmi inputs Try to unplug set AND a box or receiver if in line and plug back after a wait to allow units to boot up.HDMI can be sensitive if connected with the ...

...hdmi settings hdmi 1 is connected DIRECTTV sat. reciever hdmi 2 is connected to sony dvd home theatre dav-hdx265 both work but when I check hdmi devices it says none detected and it did before. ...

...settings). What I want is the TV to turn on with the "channel" as the HDMI-2 input (which is where my box is attached). I cannot change the on-timer channel to HDMI or HMDI-2 (or anything besides ...

...settings of your computer to ensure that HDMI is still active and that it is enabled for mirror monitor or double monitor. First things first unplug and re-plug at every point. Power cycle the TV and ...

HDMI stopped working with computer I have a similar problem. Had my computer hooked to my 40" bravia for about a month, then all of the sudden the HDMI inputs stopped working and the computer wouldn't