Fostex MR16HD/CD Digital Recorder "record player slow down" Questions

down it says Please wait until the next morning and then I have to pull the plug. Please help. Basically the unit is very slow in responding. During MY long, intensive, painful research concerning the

Recording problem with LG DR275 I brought this model as it had some good reviews in various places. I recorded on it for 3 months backing up all my video's, foolishly without checking them. When I did

...Player does not play the DVD. It requires that I check the region code. How do I do this ? Hi, My new dvd dvx492h does not work properly: Actually it loads the DVDs without problem but then each 5 to ...

has really slowed down dubbing - and disc is heated when removed, after only one dubbing and finalizing. The speed of dubbing depends on the max writing speed of the disc used. A disc always gets warm

it is a fair way through burning. There are different messages each time. Illegal write errors re: location? Slow the recording speed down some more, sometimes your processor can not keep up basically

...record/play, then you can suspect IC1 in the PSU (STRG6353 or similar). The easiest way to confirm this is by measuring the closest voltage rail (around 12V) to this device with a oscilloscope (a ...

...player to NTSC and all should be good. peace. p.d. If you download the latest firmware and replace the built-in hard drive with a newer SEAGATE Hard Drive, your recorder will function much better and ...

notoriouly slow to "boot". It that doesn't work, repeat the procedure, but hold down the power button instead of the open/close button in an attempt to reset the memory settings of the unit. Good luck

...player is turned off. It will eventually move back to the inside of the disk when you start it up. What I did was to insert a Q tip into the ribbon that supplies power etc. to the eye and gently pull ...

cctv wavy lines from camera I have a cctv system with 16 cameras and on 3 cameras I get wavy lines scrolly on picture. often problems with lines is either down to RF or if all the cameras are powered ...