Onkyo TX-SR605 Receiver "fm tuner antenna hook ups" Questions

...tuner perhaps have a cable that may have fallen out the back? Any assistance would be greatly appreciated. Kind Regards Kass [email protected] Make sure your receiver is hooked up to proper AM and ...

...tuner to work, but everything else works fine. All I get is static went I turn to the radio stations on both FM/AM I've recently moved and hooked up my system as before and now I can't get the radio ...

FM Tuner in Sherwood RX-4105 stopped working Check your antenna connections. Make sure your FM antenna is hooked up to the FM antenna terminal or jack on your Sherwood receiver. If you have the ...

...fm You cannot plug cable from the wall into a receiver, you will blow the tuner card. Use the supplied antenna or go to radio shack and ask them for an fm antenna. I have this reciever and have never ...

FM tuner is built-in. That's the only source you don't have to 'hook up'. But you DO have to make sure NO OTHER source is selected. You don't say if it actually TUNES a station or not. Try an antenna.

I have a Denon AVR-689, but can't get the am/fm tuner working, I have followed the manual, what am I overlooking? Thanks, Tim. Do you have your antenna hooked up? Check that it is properly connected.

...FM channels to fail, but still provide amplification for all other aux. devices? I appreciate any help. Thanks, Jim Well, if your unit had that happen, it sounds like it is possible. ;) I would ...

...tuner stopped working. "Tuning" flashes on-screen intermittently & no sound is produced. CD & cassette facilities work perfectly. 1. Verify the source of the signal - Look for any ...

...fm reception because of where the tuner is located. Recently have experienced severe noise in am reception when anything on the same circuit is turned on (lights, dryer, washer) sound improves and ...

...TUNER mode and toggle between FM and AM. 3. When the FM station broadcasts Stereo sound, ST is displayed. 4. Tune a station by pressing repeatedly the TUNER+/- buttons until the desired station is ...