Yamaha RX-V661 Receiver "speakers low volume" Questions

low Hello, I have the onkyo receiver with 2 front and 2 rear speakers connected appropriately to the receiver. The problem is that the rear speaker volume is too low. Anyway i adjust the receiver, the

...low volume. Changed speakers and completely rewired directly from receiver to speakers with no intermediate connection points, +ve & -ve double checked. Still cuts out at low volume. When turning on ...

speakers are working at a low volume and you turn it up and it clips and shuts off you have one of 3 problems. you have over driven your speakers and one has shorted the voice coil but still will work

...The set-up ping is also very low. Please help. Thanks some surround sounds do not put out loud sounds except from the front speakers only. Try using different inputs to see if it makes a

speakers but volume when turned to maximum is very low. Please help. Most receivers you can adjust the different chanel levels. If you refer to the manual on adjusting chanel volumes in surround sound

...low impedance speakers delivers high current to the speakers. But I still would need an equalizer to cut back some of the audio on certain frequencies that run on low impedance because you can blow ...

...low Ohms Check your speakers first. If they are less than 8 Ohms, or there's no label on them which gives the Impedance (in Ohms) then I'll lay money that they aren't suitable for the amp. Stop using ...

Speakers (Fronts: BR5, Center: BR-LCR, Rears: BR1), Sub: MS309 (Mordaunt Short). I have connected each front Speaker to AV Receiver with 2 wires (one wire for low speaker and one wire for high speaker

low an when i make volume ajustments i heard in speakers some knoking ! Please excuse my english but i am from Romania ! Thanks ! The first thing you need to do is to disconnect all the speakers. Then

the volume is low. First we need to know what drives the speakers, what the audio source is etc. In general the whole package of equipment, their settings, filters etc. in order to answer the question