GE 28128EE2 Phone "tech busy signal" Questions

...tech in.If voice mail message is busy signal it could be same as above or Disconnect Supervsision is not programmed on the lines and with the carrier.....this detects when caller hangs up then system ...

...busy button it says " set in use " Did you mean "Line" in use?Caller calling Voice Mail probably tied it up.Tech needs to program Supervision Disconnect for the line/s and Carrier must do ...

...busy signal trying to get into my voicemail to change the greeting Call in a tech. Your voicemail is offline. You could try to reboot the phone system. But we need to know which model before ...

...you just get a busy signal - how do they have to be reprogrammed? Your system lost its programming. Call in a tech to fix, as this is pretty involved programming. Post back if you need a

...busy signal for landline calls. Problem started after UVerse was installed. this issue is likely with the uverse equipment. try to unplug your gateway (the modem) and plug it back in. if that doesn't ...

...busy every time. You may have to dial 9 to get out. To test your phone, 1st find out what your intercom number is (press feature*0 and then press the intercom button) Your display will show you the ...

...busy signal instead of going into your voicemail. when you call the phone it says your voicemail hasn't been set up yet. how do we bypass this to be able to set up the voicemail again? Jill, It looks ...

...busy signal v tech 3 handset just stopped working yesterday. when anyone try's calling; they get a busy signal. we have power to all handsets and also internet is working. there is no problem with ...

busy signal) Your voicemail system is down. You have to locate the card in the system usually all the way to the right in the cabinet, and reset it with the little black dip switch on the front of it.

...busy signal without the option to leave a message on the answering machine. I have the answering machine on which does work when the phone isn't being used. Is there a solution? For this problem ...