Question about Jenn-Air Ovens
...oven temperature For example, if I preheat the oven to 350, I notice that the food is not cooking. When I turn it off and set it to preheat again, the oven will read that it is 320 degrees. It does ...
...oven temperature sensor. Replace oven temperature sensor F3Open oven temperature sensor circuit Replace oven temperature sensor F4Shorted wire (Oven temperature sensor)Locate and correct F7 A = ...
...oven is +25 degrees F. The knob does not appear to adjust (no screws on its backside). Looking inside the stem after removing the knob, it appears that there is an obstruction (white, hard substance) ...
TEMPERATURE READOUT NEVER REACHES POTENIOMETER DAIL SETTING.ELEMENTS ON OUR DOUBLE STACK 1132 IMPINGER ALL READ CONSISTANTLY 28 AMPS @ 208V.SWAPED THERMOCOUPLES BOTTOM TO TOP TEMP DISPLAY DID IMPROVE ...
...temperature. Realize it's 12 years old but isn't not used much at all. It's a JBP78 It wasn't reaching 350, so I turned it off and on again. It's not at 350. Could it be the thermostat and if so is ...
Question about Baxter Ovens
oven doesn't give steam but it does reach the temp.how can i fix that? it rotates and gets to the temperature but once you start it no steam comes out just like brown powder First locate the water ...
...oven over temperature while cooking". This applies to single or double ovens, the only difference with double ovens is the code changes to "F63" to indicate the same error for the lower oven, but ...
Question about Whirlpool Ovens
...oven temperature sensor is the part that regulates the oven temperature. If it is not working properly it could be the reason why the range or oven won't start. This part can be found inside the oven ...
oven temperature (which is not as easy as it sounds) you can do some diagnosis from the outside: You need an accurate thermometer or thermocouple into a DVM. Make sure there are no obstructions in the
227 questions posted
Usually answered in minutes!
924 Questions
123 Questions
119 Questions
44 Questions
