Uniden DECT 6.0 Cordless Phone ID "handset fails register" Questions

...register the handset to base To register a DCX150 accessory handset: 1. Charge the handset completely. 2.Place the handset in the base cradle for about thirty seconds. Handset Registering will appear ...

...register the handset(s) --- do this procedure for each handset: 0. Start by taking off the battery compartment cover.... 1. press [menu] 2. scroll up/down to "Settings" 3. enter * 7 8 9 0 # 4. scroll ...

...Register Handset menu, and then press MENU/SELECT. Handset Registering will appear. On the handset, press and hold # until the handset beeps and displays Handset Registering. When the handset has ...

...register handset The errant handsets must be de-registered from their original base and then registered to your base. NOTE: the CS6649 handles a maximum of only five handsets. If you have a handset ...

register handset #2 (the failed unit). However, I then found that I could not register the "new" handset with my old base unit because it was already registered to the "new" base unit. So, I first had

Register Handset. The display should say Handset Registering. 2. On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds). In about 30

...register a handset --- 0. Start by taking off the battery compartment cover. 1. press [menu] 2. scroll up/down to "Settings" 3. enter * 7 8 9 0 # 4. scroll down to "next page", press [select] 5. ...

...register from, and then press Menu/Select. Base Unavailable appears.4) Move the cursor to select Yes, and then press Menu/Select. You hear a confirmation tone, (For DCX150 handsets)5) Place the ...

...register a handset --- 0. Start by taking off the battery compartment cover. 1. press [menu] 2. scroll up/down to "Settings" 3. enter * 7 8 9 0 # 4. scroll down to "next page", press [select] 5. ...