Samsung HLS4666WX 46" HDTV "switch standby light tv" Questions

...you want to save power you should only be switching tv to standby, there will still be a light on the tv somewhere, blue or red it varies. TV's turn on much faster from standby than completely

switch it on tonight all we get is the standby light continually flashing. No picture no nothing. Have tried switching it off at mains still does the same when plugge in to mains. Is this likely to be

...standby light flashing...nothing on screen and lamp not coming on? Its an hlp5063w. Please help.. Since you have replaced the lamp and wheel, next would be the ballast and power supply board. These ...

switch itself on, the "standby/timer/power" (it's the one light) light flashed red 5 times then on the 6th time it went green, I heard sound for a second with no picture, then the unit would start the

...standby red light on the ON/OFF button, but this case I did not see any power. I checked the same outlet that I use all units, it does have power to my receiver and DVD player. Does anyone could ...

standby, Power, and Lamp. If I unplug it it does the same thing no matter what outlet I use. I took the back off the TV and for that 10 sec the the TV comes on I can see the lamp lights up fine.....So

...switch and noticed it was held together by superglue. I then proceeded to re-glue it and reattach it to the cover. I recieved a new bulb today and installed. I closed all the panels so the cover ...

...standby/temp and lamp lights up and flash! is this an overheating problem? Please somebody let me know what I need to fix this inconvenience. Thanks alot. with the back cover off there is a small ...

...standby and timer First remove the Lamp Door on the rear of the set. Locate the Lamp Module and loosen the two screws and remove the Lamp. DO NOT TOUCH THE GLASS SURFACE!!. If you do not see any ...

...STANDBY TEMP. Can one or two of you Experts here tell me what this means ? And am I looking at a roughly expensive repair ? Thanks Guys for the Help..... Check the lamp cover to see if its properly ...