Zenith Z62DC1D Television "power lamp" Questions

...Lamp Replacement Procedure: 1. Press the POWER button to turn off the power. 2. Wait for about 1 minute until the cooling fan stops. Note: The lamp cooling fan will continue to operate for about 1 ...

...lamp power supply. Also, keep in mind that, although rare, occasionally the lamp power supply will fail in such a way that it will take out the lamp and any other lamp that is put in. So if your new ...

...power on. Replace the lamp, also the shut down time is correct the unit must allow plenty of time proper lamp cooling. otherwise the lamp life will be greatly shortend. normal lamp life is 3000 hrs. ...

...lamp hi, 1.Turn off the power on the main unit. Wait several minutes, then unplug the power cord. (The cooling fan will continue to operate for about two minutes after turning the power off.) 2.Wait ...

...lamp. when plugged in, power light just replaced lamp. when plugged in, power light is red. if you turn on, blinks green for a while and then goes red. lamp light also stars blinking after a couple ...

suspects are the lamp ballast/power supply board or a mis-aligned lamp door. There's an interlock switch which opens when the lamp door is removed. Try removing and re-installing the lamp and the door

...lamp flashes 134 times, then power solid red light comes on, it shuts off. It is symptom of weak Lamp in your TV, replace Lamp with following part number.. A1606034B LAMP BLOCK XL-2100U It is ...

lamp: 1. Turn off the power on the main unit. Wait several minutes, then unplug the power cord. (The cooling fan will continue to operate for about two minutes after turning the power off.) 2. Wait at

Lamp or power? Tv had a box saying projection lamp near end of life. Replaced lamp and now will not power on. Power light on front of tv blinks red 3 times. What's wrong? Thats a lamp switch error. ...

...power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out. Replace Lamp Compartment Door. Set the lamp compartment ...