Samsung RF265AA Bottom Freezer French Door Refrigerator "broken icemaker stop clicking" Questions

...icemaker makes clicking noise. unfortunately it sounds like you have a broken tooth on the drive or driven gear of the ice maker, in this case you should replace the ice maker. The good news is that ...

broken due to heat and age Sounds like cooling coils inside ref. that cools the water before the dispenser in the door. These coils are in the back bottom of ref, behind crispers. They may be leaking.

broken ice maker. The icemaker is one with the metal on/off arm. Same problem, I had several power outages in a day recently. Don't know if this is when it quit making ice or not. The tray cycles, but

...broken...which caused my "no ice" problem. A simple test is to push the white wheel toward the icemaker. If the wheel starts turning, you have found the problem. You see, behind the whhite wheel are ...

...icemaker valve. The back of the unit is spotwelded on and can't be removed. Tipping it over and going in from the bottom doesn't look like a good idea. I'm about to get out the cutting torch!!! Can ...

...shut-off valve or water-inlet valve, or both, if necessary. The ice maker head assembly may have broken parts. Look to see if the gears are broken. Check to see if the small plastic arms that rest ...

...broken? NOTE: This is a multi-solution answer since I don't have all the tech from your question to pinpoint your problem But the solution is in here generically, if you read and study the ...

...broken. I tried glue but it popped again. I can't find the part on line, perhaps because the frige was bought in 1987. Can is simply replace the motor (which is still working fine but is missing ...

icemaker) the broken wire is a notorious design flaw, and if you see it dangling from your ice tray - symptom is no ice being made - You must remove the clip underneath the ice tray, and a little foam

...broken slide (meat draw lowest) Any other ideas? NOTE: This is a multi-solution answer since I don't have all the tech from your question to pinpoint your problem But the solution is in here ...