Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum "wont turn plugged" Questions

...wont turn on. My Bissell 6596 was working fine and I turned it off to empty the canister. Now it wont turn on. The belt is intact and the brush turns freely in both directions. What could be wrong? ...

...wont turn on, Was cutting in and out and now wont turn on at all. Have cleaned all the filters and checked for loose wiring and all ok. Is there a fuse??? My Dyson DC14 will not run. It will turn on ...

wont turn on - Plug is hot - is there a reset on the motor IF THE PLUG IS HOT YOU NEED A NEW PLUG- ALSO MAKE SURE THE OUTLET YOU ARE USING IS OK If plug is hot, it isn't making good contact with the ...

...wont turn on The dust bag was too full and when I checked it it had ripped now when I plug it in and turn it on it wont start dust bag not the problem so take into guarantee vacuum and sewing center ...

...wont turn on..light on My dirt devil bagged upright(swivel glide) was running and then turned off. it was on and plugged in. now the little light on the bottom back comes on when I turn it on but it ...

...wont turn on. Its plugged in and everything but wont turn on. I've had it for a few years but its always worked before. Do they have to heat up if I haven't used it in a while? Hi, Here is a tip that ...

...wont turn on now Kids were using Kirby Ultimate g and noticed a burning smell, so they turned vacuum off and told me (dad), now it wont turn back on. Belt is ok. the front of the machine ( the peice ...

...vacuum bag and cannister in place tight.i remember some of 1960s and late model electrolux vacuum cleaner if the vacuum bag container door wont closed all the way vacuum cleaner wont turn

tornado cv30/1 wont turn on was plugged and I ckeaned it out--vac wont turn on after doing that. Had a weird smell After changing bags my tornado vacuum will not restart

wont turn on when pluged in and the plugs that wont turn on when plugged in and the plugs that were used do work the vaccum has a lot of safety features that could correspond with the problem tighten ...