...proheat wont suction water out of carpet,,, it made a mess of my carpets now, any one no how to fix the suction problem? The valve on the bottom of the water bucket is not being pushed up enough to ...
suction down below. If the water is running out, either the valve at the bottom of the tank isn't working right or youy have a water line off, probably have to take off the top cover to check that out
...suction My Bissell Proheat wont give any flow and it has no suction. i just had the pump replaced and since then it wont work. i cleaned the filters, i checked the bladder, made sure the tubes werent ...
suction power again. This time you place your hand on the vacuum right where the tube used to come out of the back of the vacuum. Has the suction improved? 5:If the suction power has improved then you
...suction part are all working correctly. I think you have two problems. The leaking is old seals on either the containers, or on the other end (the machine). Try replacing them. There are various part ...
...right away to minimize chances of bleaching out your carpet. I have a Proheat 2X and and it would not dispense water & cleaning solution. I don't know if this will work with your unit... but I ...
...proheat clearview wont put out any water either on the floor or the hoses wont work either help water will come out of the hose for the furniture cleaner but not for the carpet. Have cleaned the ...
...Suction works fine. Bissell ProHeat 2X used only four times. You need to check that the motor drive belt is OK and turning freely to drive the water pump - under the flap on the right side at the ...
...suction, what do I do to unclog it hi ... first take bucket off ... you should have a rubber seal right hand side if i remeber rightly :) if its not there thats your problem.. other wise it can ...
455 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
244 Questions
