Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum "replace brush motor carpet" Questions

watched the motor turn the metal spindle that the belt rests on, and the belt turns as well. The belt is stretched and needs replacement.(Belt # 38528036) . The brush is not turning against resistance

...over heat the drive motor. try using a height setting that raises the brush so that it barely touches the pile. If this issue has been going on for some time, you may need to replace the drive

...MOTOR BRUSHES HAVE WORN OUT, OR THE BELT IS SLIPPING. saw another answer saying to put electrical tape on the brush roller where the belt contacts it. I was thinking that the brush roller bearings ...

...brush motor Hi, can you please give me a phone number where we can purchase the brush motor (1/6hp) for Minuteman Ambassador carpet extractor with model no. C46000-00/C46100-00 , the part number is ...

lot of sparks coming from the motor. could it be that the motor has fried or is there brushes to the motor need replacing if thats possible You will need to replace the motor, nothing else causes this

The brushes do not turn on my Bissell ProHeat Select 2X carpet cleaner motor that runs the brush needs replacing , average repair parts/labor $ 65.00

...Replace the brush into the grooves which hold it in place Replace the existing belt on the brush assembly, or replace a broken belt with a new vacuum belt. 6:Verify that the brushes now turn freely ...

...brush on and off is damaged and needs to be replaced. You can order a new clutch assembly and replace it without much trouble. They want you to think you can switch between floor and carpet settings ...

...Can you comment on this? Does the motor stop or the brush roll? If it is the brush roll, then replace the belt. If the motor is stopping, then it could be the motor or the cord for the opwer