Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum "remove hose pro" Questions

Ad

...remove the hose from the base of the bissell spot clean pro to remove a clog. In the right angle crook between the suction gate and the start of the clear hose is a hair clog. when turned on, the ...

Ad

...remove the hose. I found a long spring inside the hose. (I'm guessing it is to try to prevent blockages.) I blew threw the hose and a good size cloud of a white powdery substance came out. I ran the ...

Ad

Question about Euro-Pro Vacuums

1 Answer

...hose screws into. Remove the old piece, cut the hose cleanly and screw back in, then snap back together. They don't seem to have this hose anymore and since the vac also has problems with its cord ...

Question about Euro-Pro Vacuums

1 Answer

...is detatched first. Or you may frin a small port to fill with water, it was desinged to release water so as you now water must go in. you may have to remove the hose at the top and fill it that

Question about Euro-Pro Vacuums

1 Answer

...remove the hose and push a broom handle or stiff wire through. If you have compressed air available, you could try that, outside. Im sure you have a clog and if you remove it, you will be back in ...

hose to block. You will have to remove any obstruction. Another test will be to check the area where the hose attaches to the vacuum, switch on without hose and use a piece of paper to see if there is

Question about Euro-Pro Vacuums

1 Answer

...remove the mop attachment, it steams like crazy out of the end of base unit. When you re-attach mop head, all steaming stops. Is there a clog somewhere in the hose? Hi, Here is a tip that I wrote ...

Question about Bissell Vacuums

1 Answer

no suction Your dirt path has a clog. You might be able to remove it by reverse suction but you will probably have to remove the hose.

Question about Rug Doctor Vacuums

2 Answers

...hose that is now visible under basket and pull up and remove that (noticing where the slot is to put it back when finished) and pull the screen off top of hose and clean that as well. I then vacuumed ...

...will need to use a heat gun in low heat on the coupler to make it pliable. Be sure to remove any old hose pieces from the coupler. Reinsert the hose while the coupler is pliable and allow it to

Not finding what you are looking for?
Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum Logo

1,213 questions posted

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...