my shark navigator swivel plus, the brush has stopped working This was stolen from the Internet: Shark Navigator Lift Away Deluxe NV360 Roller Brush Belt Replacement Anthony
Lift Off Bagless 12 amp vacuum; Model 3750, serial # 04041600712S. It made a rubber smell and then brush stopped turning. I disassembled the brush and cleaned it out. It did not look like anything was
...lift off stops working after falling over. my bissell lift off fell over backwards while hoovering,upon standing the machine back up it refused to start again.I checked the plug fuse and also left it ...
my bissell lift off's brush has stopped working and its lost suction.. also it keeps overheating... what do do.. its the bagless type brushes aren't turning
...lift off parts are burnt. The vacuum still works fine but I have stopped using it since I discovered the burnt parts. What parts do I need to order to fix this? I can find the male part number. Do I ...
lift off vacume I have I found thrown away because they never cleaned it outthe brush was dirty and full of strings the belt was worn, the hose under the vacume was full and stopped up the hose in the
Question about Shark Vacuums
lift away beater bar attachment stops working intermittently My shark navigator lift away beater bar attachment stops intermittently but if I lift it apart and clean and apply dielectric grease to get
Question about Vacuums
hoover canister s3755 and the beater brush will not turn on the carpet it spins fine as soon as you lift it slightly off of the floor, I can't imagine it is the belt as the mac The brush will roll
Question about Bissell Vacuums
...use. One filter is located under the Flow Inidicator: Unscrew the Flow Indicator Cap to remove it. Lift out the rotor and the filter is under it. Lift out the filter and clean. Reinstall in reverese ...
1,213 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions
244 Questions