Need to replace belt and cannot figure how to take it apart to get at the belt --- Took Screws off on the bottom but could not get to the belt You have already removed the screws so lift the brush ...
carpet brush not rotating Kenmore Porgressive model 116.22613203. Vacuum was working well on carpeting but had an odor of something burning. Found that there were threads and hair wrapped around the ...
My brush is not rotating I used the wand earlier today and when I tried to use the vacuum on the floor it was no longer working. The brush is not rotating Hi there, it's Jack at Dyson. I'm sorry to ...
Brushes wont rotate Hoover SteamVac F6215-900 I have cleaned brushes and filter, the brush drive system, when enguaged, rotates with no brushes in placed, however you can stop the rotation by just ...
Brush bar doesn't rotate. The brush bar doesn't rotate so makes it very heavy to push. Never the less it still picks up dirt very well. Either the bearing in the rotating brush is bad and ...
Kenmore 116.23513301 Motor runs, but the brush will not rotate. Every time I hit the overload reset button, it will rotate for about a second then stop. I replaced the belt and cleaned around the ...
...do not rotate brushes will not rotate on a hoover f7425-900 steamvac. the filter is clean Sounds as though your drive belt has come off. Or you have an object stopping the brushes from
why does the rotating brush not work ? not picking up dirt as the rotating brush not working. Tried changing filters etc no avail Check to make sure rotating brush is turned on and check for broken or
Belt not broken.... brushes will not rotate. Belt not broken.... brushes will not rotate. most have two belts, brush roll rotates only when head is level with the floor....
1,213 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions
244 Questions