...has a front agiator belt that is loose and slips on the agiator so it will not turn under a load. I replaced the beld, 385280-34, but its the same problem, too loose. Is there a tension adjustment on ...
...belt tensioner or bearings. how to replace. Replacing the brushroll and belt usually takes care of it unless the motor is bad. Remove the belt tensioner. Only a few models had it and Dyson determined ...
...belt, even if it isnt broken it could easily be stretched out ( all belts of that type should be replaced every year - even if you didnt use the machine at all ). if that doesnt work that tension ...
...no brush tension Did didn't mention which belt you are talking about, there are 2??If it is the pump belt, then replace it, if it is the cogged belt, there maybe a broken part if the belt looks
...motor to pulley of vacuum maybe loosen,or replace the tension belt from motor to pulley already worn out,replacement should be done by qualified appliance technician near your home or service
...belt is stretched and worn there is nothing you can do, you have to replace them. Here is the belts you need for your model: Hoover U6476-900 Belts New belt is needed on yours. These do not have a ...
Question about Hoover Vacuums
...replace the roller. If your like me though that isn't any good. so what I did was wind wax coated dental floss into the groove that the belt rides in and in and then put a couple of drops of super ...
...and it seems to be loose, any ideas? take out screws on bottom and see if tension bar can be tightened, make sure the right belt is in there, also if belt looks worn or gouged replace with a new ...
Question about Hoover Vacuums
...replace that belt as well. DO NOT put the v belt under the tensioner pulley. It will break should you do so. I'll include a link to the correct part # for that flat ...
204 questions posted
Usually answered in minutes!
154 Questions
86 Questions
80 Questions
71 Questions
49 Questions