Eureka Altima Upright Vacuum Model 2996AVS Vacuum "plugged" Questions

I had my bosch 1400 W 12 amp vacuum plugged in and it blew a fuze so I reset the home fuze box and went to plug it in and it sparked and blew the fuze right away. The plug was very hot to touch. I am ...

Got a numatic henry (green colour) There is a loose wire in plug, but can't open plug to fix. how do i? Thankyou Hi. Very simple this one. The plug is molded type this kind of plug is sealed so you ...

Vacuum shuts off and on as though it had a loose wire. Plug in the vacuum and turn it on. If it has rollers, tilt it back or lay it on its side. Then, if it's still running, wiggle the plug wire by ...

hey my duracell CEF 23 battery charger has a detachable wall plug at the end, and what my question is what is the area after you disconnect the wall plug component for? i cant figure it out It allows ...

Sometimes it works and other times it doesn't - very unpredictable and most annoying You have a loose wiring connection either at the plug, in the cable or at the switch. The most likely place is ...

Bell Howell 7650TMO Sunlight Floor Lamp....I need to replace the plug...does it matter which wire goes where on the plug? Only 2 wires come out of the lamp. Thanks. Yes, it does matter if correct ...

Why does my plug get extremely warm or hot? After using my vacuum for a short time, the plug and cord close to the plug get extremely warm or hot? What is causing this and how do I fix it? Inside the ...

...it has an "American" plug on it. If the plug is swapped for an "Australian" plug (or adapted) and plugged into the wall, the vacuum will be connected to 220 volts -- this would destroy the motor. ...

How do I replace the electric cord for my Simplicity Shadow Vacuum cleaner model S13L? It's a canister cleaner. Since the problem was with the plug on the electric cord, I replaced the plug, I cut the

how do i charge my i stubble 7890u it came with 2 pin plug i changed it to a 3 pin plug but it keeps blowing the socket It sounds like you have a stray wire shorting in the 'new' 3-wire plug.. Or some