Eureka Altima Upright Vacuum Model 2996AVS Vacuum "makes beater bar stop working" Questions

Beater Bar Won't Work. The beater bar starting to make a very loud grating sound then stopped working. I cleaned the entire area (there are no obstructions) and the belt is OK. The beater bar DOES

...beater bar not working and not dirty, no reset switch on this one., now back to the store for another? i don't even want the same one. I wonder how many they are gonna give me. This seems to be a ...

...beater bar. The beater bar is spinning and working fine. But now the vacuum is making a horrible rattling noise when I use the upright. The rattling stops when I stop rotating the brushes. Any help ...

...beater bar on my Dyson won't turn. The vacuum runs and suctions but the bar won't turn and the belt is not broke. The beater bar did get a carpet fiber caught and wrapped around it which stopped the ...

...beater bar from rotating. When it is then switched on, this immeadiately places a huge strain on the belt which then snaps (quite often accompanied by a burning rubber smell) If you still have the ...

...makes no attempt to turn on the beater bar. Any help you can provide is appreciated. Good day! Normally when the motor is easily moved back and forth means that it have a proper lubrication,proper ...

beater bar stopped working. Not clogged. Make sure that the belt has not broken and is engaged. Also, if your vacuum cleaner has a "bare floor" setting, make sure that the lever is switched to carpet.

the bag emptor is not attached properly and one that won't let it run if the hose or beater bar head isn't attached. Check those areas first. Make sure your getting good power voltage through the cord

beater bar stopped working and NONE of the floor mode buttons work.. no lights or anyhting. I checked for obstructions per the Dyson manua This is a new machine although a dated model. I have only had

...beater bar on the vacuum. The beater bar bearings and brushes could be plugged with debris and/or the belt is simply worn out and needs to be replaced. Unplug the vacuum, turn it over and look for ...