Eureka Altima Upright Vacuum Model 2996AVS Vacuum "belts break" Questions

another problem. Those belts are not supposed to break. The machine has a circuit breaker. If the breaker didn't function properly and caused the belt to break, you will likely just break the new belt

...belts are not always to spec's. for example: you pick out the belt that's for your machine you go home and put it on and not even 5 to 10 mins. the belt breaks, thats because the spec's or not at the ...

the belt on my oreck xl keep breaking the belts keeps breaking like it is getting to hot and only breaks half way, enough to keep it from turning. Thanks, Kathy the brush roller is siezing up on ...

Why does the belt keep breaking as soon as I turn on the vacuum? Hi Have you got the correct belt? If its breaking then the brush end caps or something is clogged. If you can get into the floor head ...

...belts for specific machines. An incompatible belt installed on the vacuum cleaner will cause the belt to break or burn. The belt must be installed according to manufacturer directions for best ...

Need a diagram showing belt installation detai Belt keeps breaking almost immediately - is there a post or something that keeps belt in place? Very very hard to get belt on. otherwise sucks great! ...

belt constantly snapping after replacing belt and turning on, belt snaps in 15 seconds. Agitator turning. Any ideas on why this is breaking? Make certain the belt is twisted the correct direction and ...

...cleaner manufacturer produces specific belts for specific machines. An incompatible belt installed on the vacuum cleaner will cause the belt to break or burn. Good Luck!! Thanks for using

i have a dyson dc07 the belt breaks all the time and the whole brush has just snapped underneath ? There appears to be an issue with parts connectoed to the belt and brushbar. This iscaused the belt ...