...spray when the trigger is pressed. After spraying you go over the area to suck the water out. The valve on the trigger is faulty. I found this I had the same problem, after buying a new clean water ...
Question about Hoover Vacuums
Trigger on hose attachment not working so water sprays constantly The trigger doesn't seem to have much motion to it, unllike the trigger on the handle for regular floor operation. For that, it is ...
spray trigger stuck? Hi there! If the spray trigger is stuck try removing and replacing the handle. Remove the two screws that attach the handle. Slide the handle off. Inspect the two rods inside of ...
...spray tip by repeatedly squeezing the trigger with solution tank off the unit. If not, spray tip may be clogged. Try and unclog spray tip with a pin or paper clip. If still no spray, please check the ...
...trigger and it still sprays on to the carpet. It will continue to spray until it runs out of water. I think you should take it to the manufacturer that made this product, so that their maintenance ...
trigger to spray the solution on the floor but now even though no contact is being made to use the application trigger it's still spraying constantly and at normal flow. If you have any advice I would
...trigger and spray the mineral spirits until the trigger unsticks and works freely. Then set the bottle aside, labeled with the correct contents, for the next time it happens. (If your floor has a ...
Question about Bissell Vacuums
...spray trigger appears not to be working. The flow indicator is going as soon as I turn it on and it appears as if water just continually comes out. It acts as if the spray trigger is always being ...
...trigger if ok spray motor stuck on I had thid exact problem and I found the white plastic piece was sticking in the black housing. I put the white nozzle in a drill (after removing the o-rings) and ...
615 questions posted
Usually answered in minutes!
746 Questions
262 Questions
179 Questions
146 Questions