Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum "remove clean plastic cover" Questions

clean the vacuum intake. 3 screws to remove. Remove 2 from the bottom at the front that hold the clear plastic cover on. The other larger one is at the top by the tank. The cover comes completely off.

...clean the front plastic where the water pulls the dirty water through. It is day and filthy. Help There are three screws that hold the clear plastic cover in place. Turn the machine over and remove ...

remove the clear plastic cover on my carpet cleaner to clean the dirt out of it? I removed the two screws near the head but I can't get the cover off just lift it up probably suction holding it Bissel

...plastic on its holder either side of the belt. Is there any way of fixing this problem? remove base cover by 3 'screws' 1/2 turn anti clockwise and clean well remove fibres replace cover and re

...remove brushes and clean under the cover? I too have this machine. On this particular model the brushes are not removable like on the newer versions. You can either purchase a "cleaning wand" from ...

...remove brush to clean off wound up stuffl. You can view the manual (a page at a time) here: Shark Navigator Lift Away NV351 26 Owner Manual Cleaning The Post motor... But it looks as though they ...

...remove the two phillips screws on the collar above the head where the wand tube enters. Then there are four plastic retention clips that can be released with a flat head screwdriver. When lifting ...

remove the cover of the powerbrush so that I can clean out all the dirt. there are two screws on the front of the clear plastic end. take off those two and your set.. Be carefull when you pul it back.

How Do I remove the plastic cover over the brushes for cleaning What kind of vacuum are you trying to get the cover off of?

...clean. Ive found 6 torx screws bit still can't remove the coloured plastic cover. How do I remove it? Got the same ! Remove both back wheels (just pull gently with a screwdriver), then with a big ...