FixYa.com
Technical Support, Instructions & Repair Service

Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum > Search

Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum leak

Bissell PRO Heat Steam Cleaner

the seal at the bottom of the tank, it needs to be on the tank, not in the hole. The flow indictor cap is leaking air or maybe is too tight. If you had the top cover off, make sure that the tubes are routed right so as not more...

.   Hoover SteamVac Carpet/Upholstery Deep... - Troubleshooting

When squeezing trigger and Depressing

went in as instructed. The screws and bolts were no problem this concerns me because the main complaint I read about this model was leaking from the trigger and clean surge and the problem was not getting the rod in place. No matter how many tries or people (three) more...

.   Hoover SteamVac Carpet/Upholstery Deep... - Troubleshooting

Hole in Teflon Tape covering Heating Element

the Bag gets a hole from the heating element being exposed through the hole in the protective Teflon Tape. This situation causes a vacuum leak and the Bags don't seal properly. What I need is a new Heating Element Assembly, complete with the Protective Teflon Tape. Any one have more...

.   Hoover SteamVac Carpet/Upholstery Deep... - Troubleshooting

I purchased a 26 horsepower,

Lexington, Virginia. The deck retaining pin/bolt sheared off for no apparent reason, the lights quit working several times, and it developed an oil leak that would leave a 4-5 inch puddle over night. There were a few other problems that should not have happened but that is more...

.   Hoover SteamVac Carpet/Upholstery Deep... - Troubleshooting

i have an old hoover

to 6 months, and keep the extra belts in a Ziploc bag in the refrigerator. Also check for any bad gaskets that could be leaking, I may suggest a vacuum tune up @ you local vac dealer. So if you need further assistance, please feel free to contact your more...

.   Hoover SteamVac Carpet/Upholstery Deep... - Troubleshooting

When squeezing trigger and Depressing

went in as instructed. The screws and bolts were no problem this concerns me because the main complaint I read about this model was leaking from the trigger and clean surge and the problem was not getting the rod in place. No matter how many tries or people (three) more...

.   Hoover SteamVac Carpet/Upholstery Deep... - Troubleshooting

We used our Hoover SteamVac

ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. It sounds to me that you may have a clog or a vacuum leak in the vacuum line. The suction should be able to pickup the water into the holding tank for you. So please feel free to more...

.   Hoover SteamVac Carpet/Upholstery Deep... - Troubleshooting

Back to Hoover SteamVac... page.

Previous     4 5 6 [7] 8     Next

Search keywords inside Hoover SteamVac... Manuals & Guides, Troobleshooting:

Sponsored Links

Repair Service
Find Vacuum Repairman Near You:

FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions, posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms. You may NOT copy or distribute the content that appears on this site without written permission from FixYa Inc.
© 2005-2008, FixYa, Inc. or its affiliates