...Wrong? Every time you change the bag you should clean the eye. The eye is inside the tube behind the bag collar. Just use a lint free cloth and wipe all around inside the tube. That worked for
Question about Broan-NuTone Vacuums
...time before poping. I am looking for the route cause of this problem. I have replaced the breaker but no change occurred with this issue. Any advise and is this a common problem with these vaccums? ...
...time I used it the power faded in and out a couple of times I wiggled the lead and it continued to work. However today it will not power up, I have changed the fuse just in case hi from uk the ...
time I must raise the handle up and back down to get the brush to restart. It repeats this constantly while trying to vacuum. I have tried turning the brush switch off and back on but this action does
Question about Dyson Vacuums
...a small knob that turns the internal valve from hose to floor suction. if it is broken it won't change over and will either suck only thru the wand or the brush bar depending on when it broke ...
change LCD alarm clock Underneath clock there is 4 buttons, 2 of which are marked (m) & (s) and the other 2 buttons marked with arrows for (up) & (down). depending if you have the clock, alarm
...time I vacuum I have to clean out the hoses because the dirt gets stuck right at the entry hole for the dirt cup! Any suggestions? Thanks! The dirt in my vacuum keeps getting stuck into the hose and ...
...constant drag. So first you need to check the HAM, as follows: with the handle in the locked upright position, switch on and wait for a few seconds (there may or may not be any signal from the green ...
...out of a bottom air outlet opening for when the air flow is blocked. We have looked into clogs, changed filters, and the whole works, to no avail! Quite Frustrating since I love this purple
Question about Windsor Vacuums
...change new bag and clear all the host, but still same issue with red light on. need help badly. thanks I have a question for you... my sensor s12 - the motor cuts in and out as the machine is moved ...
67 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
