...washer in it's spin cycle,let the machine runs for a minutes and then open the lid and notice if the tub is spinning: if it's spinning when you lift the lid that means the coupler is fine and if it ...
...machine is supposed to work? I have had my Cabrio washer a little over a year. No it isn't suppose to do that. There is a setting for spinning high medium and low spin. Maybe you can change the spin ...
...spin cycle washer was real loud at final spin cycle and it doesnt spin clothes dry at final spin cycle now. it wont build up full speed of spin cycle to get clothes dry enough to put in the dryer. ...
Question about Whirlpool Washing Machines
...washer will spin but never reaches the 'higher' spin cycle which leaves the clothes wet. The washer worked prefect before we ran the clean cycle. Also, when there is no clothes in the washer, and the ...
...Washer Model:MAV2757AWW. I just replaced the Drive belt because the cloths were dripping wet after the spin cycle. The machine spins but not fast enough to decently dry the cloths. They are dripping ...
Question about Kenmore Washing Machines
...machine hopping. When the tub spin is manually held still during agitation cycle, normal spin / rinse cycle occurs with no wrapping of clothes around agitator / no machine hopping. Nonfunctioning lid ...
...washer spin cycle does not remove the excess water from the clothes, The clothes is very wet after a regular wash cycle. There is noise during the spin cycle but it it is not spining Dear shelldon39, ...
washer in its spin cycle. Let the machine run for a minute, and then open the lid and notice whether the tub is spinning: If it's spinning when you lift the lid, the coupler is fine. If it isn't
...washer does toss the clothes at a light spin but never fast enough to get the water out of the clothes. Any suggestions You are having a door switch problem change it out and you will have a new ...
...washer in its spin cycle. Let the machine run for a minute, and then open the lid and notice whether the tub is spinning: If it's spinning when you lift the lid, the coupler is fine. If it isn't ...
399 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions