...am trying to replace the cable to self propelled Hoover windtunnel vacuum, but I can not remove the top to get to it..the actuator also broke but I can get the top off??? please help thanks so very ...
...the transmission on line for about $16.00. It comes as a cable and lever assembly. I just took the top cover off and replaced the lever without doing the cable. The reason ours broke is because we ...
...it is to put it on the motor shaft first and then to start putting it on the large pulley at the top and roll it on these belts can be hard to put
changed if it has been longer than 9-12 months. Next I would remove the upper handle to inspect the top section of the control cable, sometimes it fray's and has a sponge feel (no positive control) to
Question about Hoover Vacuums
...my Hoover windtunnel upright self-propelled? The switch to turn the brush roll on and off is on the top cover of the nozzle ...
Have an older Dirt Finder U6331. the self propel cable does not seem to engage when working the top handle. Is their an adjustment or repair I can do? you will have to replace the handle or the cable ...
...on. Your vac is a Self Propelled Hoover Windtunnel upright. It should have two small buttons on the top of the hood that control the self-propelled feature and the height of the carpet being swept. ...
...is a worn pulley on the roller, a new belt when inserted around the roller should be even with the top of the pulley
...Check the cable to see if it is broke either in the handle or down below, you can see it from the top . If it isn't broke, the part that the cable hooks to (actuator)may be broke. Could be the flat ...
...is broken that controls the self propelled motor. But I can't figure out how to remove the the top cover that will give me access to repair. Any thoughts? ...
103 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions
