Euro-Pro Ultra Steam SharkTM II Hard Surface Steam Cleaner Vacuum "vacuum cleaner switch shark" Questions

...vacuum cleaner runs but brushes won’t turn, check the switch on the vacuum cleaner and be sure it’s on. Sometimes the switch will click twice. One for suction and two for suction and roller brush or ...

...vacuum cleaner is in the UPRIGHT POSITION. Because now you should be using the hose and attachments The switch or brush roll motor may be defective. Pull the handle down while brush roller switch is ...

...switch pressed Was using cleaner, ran out of steam and water. Unplugged it, waited until it cooled down. Refilled pushed on/off switch to on, will not come on, no power to switch it appears. I had a ...

vacuum cleaner gives you the option to turn the roller brush on and off, be sure the button is on and the handle is pulled back. If you don’t have the option and roller brush is not turning, check the

...button must be turned on. If your still having problems, the limit switch inside the head unit where the brush spins is broken. This is a common problem for shark vacuum cleaners especially the

...perduce steam also stopped lite flashing at control switch,is it worth fixing.paul Use CLR cleaner in it, let it soak for a day or so, dump it out. fill it with filtered or bottled water from now ...

...cleaner (Euro-Pro steam canister) when plugged in gets warm but both the "ready" and "steaming" lights do not come on and no water or steam come out when the switch on the handle attached to the hose ...

...switch my vacuum stopped working and it sounds like a spring is loose when I switch the on/off button. I have taken off the screws to try to get to the switch but I can't pull apart the plastic parts ...

...vacuum cleaner Model No. 400 won’t stay “on” unless I physically hold the on/off button down while trying to vacuum. The machine is working PERFECTLY FINE aside from this issue. When I unplug the ...