Amana 3.2 cu. ft. Top-Load Washer "pulled knob nothing happens" Questions

...knob--nothing happens. Matag washing machine will not start. I set the dial and pull the knob and nothing happens at all. Sensor? Thanks OH TIMER there is a fuse in the machine, usually at the front ...

...to start the machine. It doesn't do anything when you press the knob in. I tried pulling the knob out and nothing happens. There is no fuse issue and the washing machine is plugged in. bad timer ...

...knob is still pulled up), and only then the washer starts (along with the dryer!). The opposite also occurs: I cannot turn on just the dryer. If I set the dryer's knob to the desired setting and push ...

...knob,the cycle light comes on and nothing happens.When i mov I have a frigidaire gallery front load washer that won't start a regular wash cycle.When i select a regular cycle and pull up the ...

...knob to turn on the machine nothing happens. I've checked the power at the outlet and it is good. Power is getting to the machine via the cord but does not do anything once I pull the knob to turn it ...

...knob to do a regular wash and nothing happens, no water no agitation. However, when I turn the knob to rinse it that works. This suddenly happened, was working before. Is it the knob? Rinse on most ...

...knob out to turn it on nothing happens # 1 reason for service call is the machine is not plugged in. Make sure outlet has power and washer really is plugged in. If not, then something inside is bad ...

...nothing. I unplugged the washer and pull the knob and again 10 to 15 seconds starting with a clicking noise, only one, and then nothing. Like a reset device is tripping. Any ideas. I would call a ...

...Nothing happens when you pull out the control knob to start the machine. Any idea? Burned Thermal Cut Off thermostat. at the bootom of heater housing, which means you have clogged vent as the root of ...