...clips holding plastic drum front, lift to one side plastic drum front cover. Tap drum shaft to remove drum from container, remove bearings. Please rate my solution. Thanks. how to remove ...
drum start at the front remove front panel,four screws 2 under front,1 behind soap drawer and the one near the filter,next take door off 4 spring clips on the next panel plus screw on door lock,remove
drum, check the holding down springs visually, remove the front panel by inserting a flat blade approx 4" from each side at the front to release clips, then remove 2 small bolts to remove front panel.
...connections, remove door gasket from front, support drum from top, remove springs, lower drum, dismantle drum in two pieces, remove inner steel drum. well rest i think you can think
Question about Frigidaire Washing Machines
...drum remove from the front panel and should I remove the counter weight? yes it will remove there is a spring clip that holds it to the front panel. then it is usually easier to remove the counter ...
Question about Hotpoint Washing Machines
front panel and side panel to get at drum bearings gone You dont... Take of top cover, remove top front panel. Remove front, two screws top front, two screws bottom front, loosen the doorlock and door
Question about Washing Machines
...access the drum belt and remove this, then manually rotate drum by hand,i bet you will find that the drum glides/rollers in the front side of the drum are your noise makers,not the rear center ...
...drum from front and lift up on inner drum. If this drum moves up and down or side to side you will also need to replace the inner drum. If turning the drum is silent try turning the motor if it makes ...
drum belt,and from front of washer, spin drum by hand. There should be no noticeable noise. If you can still hear sqeek, then it could be a drum bearing that is dry or starting to fail. or the drum is
...front collar from the outer drum I take it you have the drum removed from the machine completeley, the only thing holding them together should be a rubber gasket, Have you taken the weight from the ...
263 questions posted
Usually answered in minutes!
158 Questions
47 Questions
55 Questions
45 Questions
52 Questions