Kenmore Canister Vacuum Vacuum "model 116 stopped" Questions

model 116 there seems to be a short in the connection between the canister and the hookup for the extension wand. if it moves a certain way, the canister will stop working while the beater brush stays

...model 116 58015700 power mate beater bar stops working model 11658015700 power mate Just pulled mine apart and the bearing on the belt side is toast. In the past five years I have had several items ...

...model # 116. 56550990C. I have lost the instructions to replace the belt in the Power Mate. The Power Mate beater just stopped working and I need instructions on how to remove the cover from the ...

but tedious to get the top cover off to look at the motor and air exit path. Look for a combination of screws and snapons. My model 116 had one screw and then the sides of the top cover was napped on

...model 116, 29512991 I have a vaccum purchased around 1998 - the vacuum has stopped working - I have checked the continuity of the house (so I know the on/off switch works) - looking for recommended ...

...model # 116 359 2350 progressive with direct drive beltless system 12 amps Wheel with brushes stopped spinning. With the cleaner unplugged, turn the unit over and look inside the opening where the ...

...Model 116 Upright bagged vacuum with Hepa filter. It's at least a couple years old. For quite some time now when ever we use the vacuum the vacuum motor will shut off nafter about 5 min. of use. We ...

...Model 116 upright beltless vacuum, agitator will not turn The agitator on my upright Kenmore 116 vacuum has stopped turning. I have taken it apart, cleaned it thoroughly and tried pressing the reset ...

...Model 116. Power retractor not holding cord when pulled out to any specific length. Always wants to pull the cord back into housing. Would like to open the housing to see what might be wrong, but ...

Model 116 56212601 Vacuum has stopped working There is a Fuse inside the Vacuum, Check the Fuse But before you do that, Confirm that the Socket is working Make sure you did not pull the Cord out of ...