6 rotating brushes What causes the 6 rotating brushes to not work? I take the 6 brush strip offand turn the rod for the brushes and they turn. It's when I put the 6 rotating brushes back on the ...
Question about Hoover Vacuums
brush block assembly. Try turning that drive shaft connected to the middle brush. All the brushes should be able to do a full turn simultaneously. If the brushes get stuck and cant make a full turn or
The brushes do not turn when the unit is on. What do I do? The belts appear to be fine, Is there an internal fuse? check belt if ok .may be brushes motor bad.... Unplug power before trying this test !
agitator brushes wont turn even after cleaning hoover steamvac f5914-900 agitator brushes wont turn even after cleaning filter. the brushes will not turn even wen the switch is turned on the gear that
...catch when turning by hand. Could this be enough to cause the brush motor axle to burn through a new belt in less than a minute? Can you take the brush unit apart to clean, or just find a
I put a new belt on my vacuum and right away it broke There may be a problem with the brush roller itself. When the belt is removed and you have the brush in your hand, make sure that you can turn it.
Beater brush my beater brush will not move check for anything in the brush just bought the vaccum 30 days ago Note: The brush will not rotate when the machine is locked in the upright position, ...
...turning. The brush bar on my dyson animal control stopped turning. I was starting the vacuuming and the bar stopped turning. I cleaned off any strings before I started vacuuming too. I turned the ...
278 questions posted
Usually answered in minutes!
140 Questions
90 Questions
79 Questions
30 Questions
44 Questions