...machine doesn't suck anything up They all have a device to cut off suction when the waste tank is full. It is normally a ball that floats up and block the suction. Yours is stuck. The manual doesn't ...
Question about Hoover Vacuums
...cleaning. What is the problem and solution? Your collection canister may not be positioned tight enough in its place ment site. Tip machine back using foot pedal (as if you were going tio start using ...
...cleaning the filter mentioned below, it is now working like it was new. ***by maverick_bea*** yes this machine has a thermal protector in it to shut off the machine if it gets to hot, this is normal. ...
...machine you can catch about a pint of water and bleach solution in the hose and roll it around inside the hose then let it sit for awhile and finish by sucking it into the waste tank, not perfect but ...
...machine is turned on We were using the cleaner, emptied the waste water, then tried to turn it back on. There is a buzzing noise (sounds like hair clippers) but no function of the brushes or sprayer. ...
...cleaning. Turn the machine upside down, sideways, look in the hoses with a flash light. do not run your machine if water has gotten into the motor. be careful and unplug the unit before you check all ...
...machine has A thermal cut out. I think your problem is caused by one of the following. 1) The filters need cleaning or replacing, Not just the top filter Premotor sponge washable but check the filter ...
Question about Vacuums
...cleaning machine 6 wires were or which goes were?? the best way is to contac the factory or company for supply the wiring diagram. Since you do not mentione what model and mark is your vacuum will be ...
...waste chamber. I've cleaned the whole machine the best I can, checked the belt, that is working fine. The cleaner is not working in the tool mode or the vacuum mode. I believe it is just clogged. The ...
...be returned for servicing because they don't work from the start. This is a waste of money and time. The only suggestion I can offer is to either forget about the machine or take it into be
7 questions posted
Usually answered in minutes!
432 Questions
390 Questions
261 Questions
302 Questions