...on my nintendo ds lite seems to be a damaged lcd flat cable...it´s very common to happen with flip lcd screen, when you open ´n close the Ds you crack your lcd flat cable...you should buy
Question about Nintendo DS Video Game Consoles & Games
...got to the ribbon cable. took it out, reset it and its good to go. there is a black bar that flips up to remove the ribbon cable. its kind of a pain, but its not too bad with tweezers also,
...Flip your PS over locate where the power cable is plugged in (it's like a yellow square-thing). Looking at it from the bottom, try to put some presure on it with your finger and try to move just a ...
...Flip it off then back on and you will have a solid red indicator light on the front. For models: CECH-2001A and 2001B, press the power button on the front until the indicator light turns red. If all ...
...Flip it off then back on and you will have a solid red indicator light on the front. For models: CECH-2001A and 2001B, press the power button on the front until the indicator light turns red. If all ...
...Flip it off then back on and you will have a solid red indicator light on the front. For models: CECH-2001A and 2001B, press the power button on the front until the indicator light turns red. If all ...
...flip the shell back into place on the PS2. Screw the screws back in, making sure the longer screws are going into the correct holes. The screws don't all have to be tight, so don't sweat it if 1 or 2 ...
Question about Nintendo DS Video Game Consoles & Games
...this way the pad is only removed as much is absolutely necessary. Once all six screws are removed, flip the box upright and grab the sides and shake it a little bit and the bottom should drop away ...
I have a 60gb Phat Ps3. I recently went to update it to the latest firmware and it downloaded the update fine and was running normally. Then as it was installing the update, the system shut itself off
6,000 questions posted
Usually answered in minutes!
1,598 Questions
788 Questions
56 Questions
16 Questions
15 Questions