HP Deskjet F335 All-In-One InkJet Printer "back off" Questions

...off and then turn them back on. Also make sure the printer is hooked up to the computer... Hope this helps. Sorry, just got back in. Sometimes you have to turn the computer and printer completly off ...

off, unplug it, wait 10 seconds, plug it back it, and turn it back on. If it still says there's a paper jam, there is something interfering with it. Turn it off again, pull everything out that you are

... but still not fixed. Did you put some oil on the carrier slide? (rod) Make sure it is off, put a few drops of lite oil on either side of the carrier, move it back and forth a few times then turn it ...

back cover off, there is a reset switch in the top left hand lock hole. Push a pen (or similar) into this hole, the switch will give slightly and be the same depth as the others. put the cover back on

...process. If that doesn't work try this: Turn it off, take cartridges out, turn it back on, turn it off again put the cartridges back in and turn it on. If none of that helped reply with more

...off turn the plug of turn it back on each time u want to use it remove the housing for your printer to see the inner parts. locate the POWER ON & POWER OFF (+/-) button of your printer. NOTE:make ...

...off the unit. Disconnect the power cord from the back of the unit. Connect the power cord to the back of the unit. Press the On button to turn on the unit.If a light is on at the "inkdrop", you may ...

...back off and look for a paper jam (there may not be one, that's OK) 2. Replace the back. 3. Push the button on the front with the flashing arrow on it. You should hear it cycle and the flashing light ...

...off and back on. I have turned the computer off and back on. I have taken out the cartridges, shaken them and put them back in the holder. Ink cartridge will go dry up if you don't use them. I would ...

...off. Need to turn it back on. Printer is a color printer. Color ink ran out, and when it was replaced, it would not print in color. Under Printer Properties, the color feature is turned off. Need to ...