Question about Brother MFC Office Equipment & Supplies
path for bits of paper, paperclips, tacks, push pins etc. If path is clear, note the position of the printhead. If the printhead is at the far left, you may need to gently slide it towards the center.
...paper path and to the toner or ink cartridge. Step 5 If necessary, remove the toner or ink cartridge. Place it in a bag or away from light to avoid damaging it. Step 6 If you find a piece of jammed ...
paper path and to the toner or ink cartridge. If necessary, remove the toner or ink cartridge. Place it in a bag or away from light to avoid damaging it. If you find a piece of jammed paper, remove it
...paper path for a stuck plastic sensor arm, or dirt or paper dust on photocell typr sensors.Paper sensors are normally located near where paper feeds, and where it exits the machine. The paper must ...
...forcing a piece of jammed paper to come out, it can begin to tear and rip. It's possible that a small fragment of paper is still inside the printer, and most likely blocking a jam sensor along the ...
paper path. Do not **** on the paper with a great deal of force because you may dislodge something more than just the paper. You may have to remove any covers that obstruct your view of the paper path
Question about Brother MFC Office Equipment & Supplies
...forcing, and gently wiggling them until they click in place. If you get the message without any paper in the printer, check the insides for any scrap of paper which could have lodged in the sensors. ...
...paper path. I had the same error. In my case one of the two springs in the paper tray was missing (on the floor behind the printer) so there wasn't enough force to push the paper up to the pickup ...
Question about Brother MFC Office Equipment & Supplies
...paper path: 1 Pull firmly on the paper to remove it. If you cannot reach the paper because it is too far into the printer, lift the scanner unit to open the printer. 2 Pull the paper out. 3 Close the ...
Question about Brother MFC Office Equipment & Supplies
...paper path (printer over the edge of the desk) popped open the front cover and manually drew the paper through by turning the cog wheels. Voi-la (sorry French spelling not a strong point) a small ...
170 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions