HP DeskJet F380 All-In-One Printer "media jam tray 1" Questions

media) from the printer. If the HP All-in-One has a paper jam, first check the rear door. If the jammed paper is not in the rear rollers, check the front door. Step one: Check for and remove any paper

...jam (remove all media from the paper trays, press the power button once, remove the back cover and pull the jammed paper from that point then close the cover, reload the paper and try to print) 5) ...

media from the IN tray, re-square the stack, and reload. Make sure that the media-width adjuster and media-length adjuster are against the stack of media. Make sure that media is not buckled in the IN

Jam [Location] Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken.

...Media Jam Message Just as the tray is about to lift the paper from the tray, something goes wrong and the media jam message appears. Hey folks! This solution worked for my "media jam tray 1" problem! ...

jam. How do I clear the message? Error Code: 241.10 Page was not properly picked from tray 1 Possible Causes ------------------------- Failure to feed possible causes include: • Edge locking • Worn or

...jam in input how to remove Fax No.is HP Laserjet3050z Open tray 1 and pull any visible jammed media out of the all-in-one. If no media is visible, open the print-cartridge door, remove the print ...

JAM [LOCATION] Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken.

...media delay jam has occurred in the registration area. Action Check for media stopped or jammed in the area of Tray 1 pick-up, Tray 2 pick-up/feed, and Tray 3 pick-up area (if Tray 3 is installed). ...

...media jam. To prevent a jam, see the following instructions: Only print on media that meets HP specifications. Only print on media that is not wrinkled, folded, or damaged. Make sure that the printer ...