...paper is not used or damaged. ? If you are using specialty paper, you follow the instructions that came with it. ? You do not force paper into the printer. 2 Before loading paper, slide the paper ...
Question about Lexmark X Office Equipment & Supplies
...not force the paper down into the printer when you load it. For example, if you are loading letter or A4 size paper, the top edge of the paper should extend above the top of the sheet feeder. The ...
Question about Lexmark X Office Equipment & Supplies
...not feed paper, envelopes, or specialty media? on page 69 ? ?Banner paper jams? on page 69 Paper jams Is the jam in the paper support? 1 Press to turn off the printer. 2 Firmly grasp the paper, and ...
...not force the paper down into the printer when you load it. For example, if you are loading letter or A4 size paper, the top edge of the paper should extend above the top of the sheet feeder. The ...
Question about Lexmark X Office Equipment & Supplies
...PAPER DOES NOT GO DOWN FULLY AND IT GETS STUCK. I DID TRY SHAKING IT AND PASSING A PIECE OF PAPER THROUGH AND UNDER AND NOTHING YET. ANY SUGGESTIONS It sounds like your paper stock may be too thick ...
...not force the paper down into the printer when you load it. For example, if you are loading letter or A4 size paper, the top edge of the paper should extend above the top of the sheet feeder. The ...
...crooked. It can also be caused by improperly adjusted paper guide or the paper is not in good condition. Paper Feed Rollers Are Rolling But the Paper Is Not Feeding How the Accu-feed Paper System ...
Question about Lexmark X Office Equipment & Supplies
...paper does not feed, continue with step 2. Check for any obstructions in the paper feed path: Disconnect the cables from the back of the printer. Open the front of the printer and check for anything ...
...paper is not used or damaged. 2. Before loading paper the first time, squeeze and slide the paper guide to the left side of the paper support. Load the paper vertically against the right side of the ...
...It printed copies fine in the morning and in the afternoon it would feed the paper, print all in one spot of not on th paper at all, then feed the paper through with a printed mess or blank
215 questions posted
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions
