Sansui HDLCD-2600 26 in. LCD Television "tv ears repairs" Questions

ears before the tv. If you still can't get it to work you'll have no choice but to purchase an outside antennae as a result of your being in a weak signal area as signal quality changes by such things

TV which has a picture completely dimmed? It s about 5 ears old now. Hi, it sounds like the lamp is on its way out. Depending on the size of the television, it may not be cost-effective to try to have

...TV VSC-32V3 32 I get no signal from the cable connection, but I get signal through the antenna connection using rabbit ears. I also get dvd signal and computer signal! I tried the antenna connection ...

TV does not power on. No Stand by light either. Ok, This is an Insignia NS-37LCD The TV does not power on and there is no standby light on either. I pulled the back of the TV and noticed there was no ...

...bet is to purchase the correct supply and install it yourself. put your ear by the switch on the tv switch it on and off a couple of times if you hear a crackle its probable the switch its self, ...

...ears. Also, the Blue power light did not come on when I pressed the power button on the TV, but this blue light does briefly come on when I use the remote. Although I can't tell if anything is ...

I have a 42 inch Hitachi plasma tv that is making a very loud static noice coming from the internal speakers. It stays at a contstant very loud volume unless I completly mute the tv or turn the volum ...

...on the TV and you should be good to go. :-) Pictures attached are from a Toshiba software upgrade bulletin I found online. You don't "bypass" it, you REMOVE it. It runs the rabbit ears, nothing

...Also look for the components which have been hot. I'm afraid it is really a job for a competent TV repair person as ther eare safety components involved.Do not touch anything while it is plugged ...

how to reset tv turned it off at mains and it wont come on hi Tracie, is the set making a clicking noise? is the power light flashing on the front? or no power light at all just dead? if the set is ...