Question about Pioneer Televison & Video
...12 time with few seconds gap continiously when I switch on the TV it goes into standby mode after few minutes, the screen stays gray. The standby light blinks 12 times and keeps repeating 12 times ...
...12 times and TVis not swtiched on. These blinks are fault indication, and known as blinking codes.From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit ...
Question about Sony Televison & Video
tv (bought 12/2005). The picture and sound goes off and it blinks 5 times and then pauses and blinks another 5 times. If I shut the tv off and wait a while, it works fine for th I have a sony wega lcd
Question about Emerson Televison & Video
tv on green light flashes 12 times, then red light comes on and goes to standby. It sounds that the main digital board has damaged. 12 blinks indicates it. if you wish to know more check this link for
...tv starts to turn on.it clicks like everything ok then after a couple seconds,it turns off and power led blinks 12 times.no picure or sound. hello, usually if your panny is blinking it means theres ...
Question about Pioneer Televison & Video
TV to power down and blink 12 times? The on TV turns on for only 2 seconds and turns off, the led at the base BLINKS 12 TIMES and repeats the blinking 12 times, pushing the off button does nothing, it
tv led blinks 12 Had 4 blinks from the red led power light. Replaced the P board or power supply board. Powered up the television and got not picture. The power red led light was now flashing 12 times
...BLINK THEN THE TV THINKS THERE IS NOTHING WRONG WITH ITSELF. ARE YOU SURE IT ISNT CODE 22 BLINK BLINK PAUSE BLINK BLINK? THAT WOULD BE A CONVERGENCE FAILURE COMMON FAILURE FOR CRT REAR
Question about Televison & Video
tv off when you come home next the blue light blink 12 times then starts all over again 12 times what's the problem These blinks [flashes] are fault indication (Error Codes). From the number of blinks
Question about Panasonic Televison & Video
...12 says Unplug the TV and disconnect connector A11 from the A board. Plug in the TV and press the power switch Does the TV power up and stay on? No Yes If the speakers wires are not pinched, Replace ...
95 questions posted
Usually answered in minutes!
154 Questions
129 Questions
91 Questions
84 Questions
61 Questions