Philips 50PFP5332D 50 in. Plasma Television "change main board" Questions

...change the main Tuner signal board,to solved this problem.Put back your old power supply board too might be still good,but some time the power supply board must have to be replace too,becaused it got ...

...Main board went so changed board and had flashing green and amber light at bottom of the tv any ideas? Water got onto the main board via the aerial socket. This causes the remote control to stop ...

...main board, the red light was on before,now with new board, nothing. i changed main board because it wont come on. Hi you should be more specific. From what is that board? Make, modell? From what you ...

...change main board . 40in flat model f4ov87c . the set comes on ,shows good picture then the convergence goes out of fays with-in- 5 to 10 minutes when coming on. changed main board. still having the ...

...how difficult is the board to change out? I have an electrical background and understand grounding. 05683m Main Board See attached link for

...change we did factory reset and the power button hold for 30 sec Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some ...

...main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main ...

change the main backlight video board,with the old power board?Don't work,than must change both new power supply board and the main backlight video board.Sometime both boards is dead require both that

main board? Or I need to change my T con board too? T con board responsible for final picture on screen of set. And visible distortions are caused by it. The inverter board powers the back lighting so