Haier HL32BG 32 in. LCD Television "remove base tv" Questions

...remove the base of a Haier TV -- model number HLH26ATBB? THERE IS 4 BIGGER SCREWS ON THE BACK OF THE TV TAKE THEM OUT AND SLIDE THE STAND OUT ....SCREWS ARE RIGHT BY AMP JACK HOOK UPS.... I HOPE THIS ...

Remove base of Insignia ns-ltdvd26-09 How can I remove the stand of the Insignia ns-ltdvd26-09? I am wall mounting the tv. to remove base from insignia tv 1)remove plastic cover from bottom rear of tv

remove. Once removed, the base removal screws were exposed. Be careful, the screws were tiny and could easily fall inside the TV. If that doesn't help you, try searching online for your owner's manual

...remove the base. Any suggestions on how to where to look. The user manual does not discuss the issue. Thanks If you ever get the base off, I'd like to buy one. I got it!!!!! i just asemble my TV on ...

...broken and I am trying to buy one. There is a metal part that the TV sits on. To remove base you need to remove I believe it was 4 screws center lower back of TV, then pull off base. Hope this

...remove the base on my 32 lcd westinghouse tv so i can mount it to the wall on a bracket? I researched this problem on the net and found the solution. Someone on one of the posts said the base can be ...

...remove the base on our new 50" Sanyo Plasma TV so we can hang it on the wall...HELP! look at the rear of the tv there are four phillips head screws holding the base on unscrew them and lift the base ...

...remove the Base from a Sharp LC 46D64U TV Do I need to remove the back panel to get access to the bolts attaching the base to the TV? The operating manuals online do no show the same config as I have ...

...Remove the Base I have set my Olevia 42 HDTV to a wall mount... How do I remove the base? I have an Olevia 42" TV. I was able to remove the base by removing 16 screws on the back side. They were ...

...remove the base on my 42 inch digital lifestyle tv so I can mount it on the wall. I have tried to remove all the screws that are surrounding the plate to hole the base but it is still not budging.. ...