LG 42LB5D 42 in. LCD Television "tv stand loose" Questions

...its stand and sits at a distinct angle on the TV stand. Sounds like stand has been installed wrong an maybe miss aligned, and screws may be loose! Try removing and start over, or call installer

...tv. Once the stand is out of the tv, look down to where the swivel joint is at, you should see 4 screws that are going towards the bottom of the stand, those will be the loose screws. I just fixed ...

tv stand base off my 42lg30. Can someone please help! DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Loose the bolts from TV. you can view

stand in the TV. The are usually all on the center bottom on the back. When the TV is on the floor, try lifting with two people, one on each side directly up evenly. The stand should stay on the floor

...commonly come loose when the TV is on a swivel stand and is moved frequently. This is because the swivel motion often causes a slight twisting of the LCD frame and this works the ribbon cables

TV stand, back panel. Remove the front cover and panel. Where the TV stand sits on the front of the TV there is a cover you need to remove. It's easy there is a metal frame all around the front panel,

...stand off my tv first pop the base off by pushing in on the four tabs simultaneously and pulling it out... once you have the base off you will need a long phillips head screw driver to get the single ...

stand off Samsung LN40C530FIF TV very carefully----set must be laid face down on padded surface that fully supports the screen with no pressure on it---one wrong move and set is destroyed.  

dynex 19 inch lcd tv does not show picture standing up but will show it laying down check the ribbon cable that connects the screen to the mainboard may have a loose connection

...it and test. It seem simple but it takes a lot of time to find the loose part. hope this helps. If you care to sell the stand that goes with your tv, please email me at [email protected] ...