Honeywell ER150B Air Conditioner "set hold run" Questions

...HOLD off on the control. It is set at 70 but our house temp is only 63. We would like to be able to change the temp easily. The previous owners had it programed to change temp auto. We can not get it ...

...Hold would not go off by hitting RUN. I jiggled the unit to take off the cover. Hold would not go off by hitting RUN,still I replaced the batteries, and it still would not turn off hold. I turned it ...

up/down temp buttons, push next to set next schedule period and so on. Otherwise push hold temp or hold to overide the program and run as a regular stat, for more info 1800 honeywell or Google support

...run program instead of hold the other day & I think it threw everything off. Help help help thanks elaine Mebnme, is right, manually setting your therm and holding hold, will override any ...

if your dryer has all the bells and whistles or is it a basic dryer. If your dryer has a simple dry setting, run it on that to see if it is a control issue or just blockage

...HOLD.TO UNLOCK THE KEYPAD: Start with the System Mode switch in eitherthe HEAT or COOL positions, and the Set Slide switch in the RUN position.Perform a single press of each button, in the following ...

Someone in my house set hold temp (91). i cant change it. it is so hot in here. how do i change this setting? What kind of thermostat?Is there no "run program" button?

...run Un-configured service board. Board needs to be set to either cooler with electric heat or heat pump. Enter config menu and set C3 to either "c" for coolers or "h" for heat pump. For newer boards ...

...set program'. Then, on the left of the unit are two buttons, 'override' & 'extra hour'. Press and hold both together 'till 'inst' shows on the panel ( about 5 seconds ). Then ( lots of fingers ...

...hold is not on, if it is push it to turn it off, if not read thru the manual. On most stats if the unoccupied set point are blocking the occupied set points run the unnocc. temp down and then set the ...