maker The wire arm that travels up ad down when it dumps ice. Lift the arm to the horizontal position and it should stay there. The ice maker is now off. Push the arm back down and the ice maker is on
...ice is coming out. The arm feels loose now and will go up and stay in the "off" position and will allow you to release it to the "on" position. What damage did I do by forcing the arm down and what ...
The arm on my ice maker stays in the off position and when I turn off the power to the ice maker and let it melt I still can't move the arm back down Your ice maker is bad replace it.
...arm of the ice maker and make sure that it is down and not blocked by any ice cubes. If it's raised, it has turned the ice maker off. This arm needs to be in the lowered position to activate the ...
...need to be replaced. It is possible that the metal arm has become disengaged and could be installed? Refrigerator Repair Replacing the Ice Maker Shut Off Arm Whirlpool Part... Hope this has
...arm is down. The front of the ice maker in the freezer say the off position is up. What is right? Also, should the water valve in the rear be closed or does it not matter if a water line is not ...
Ice Maker arm is locked in upright position, will not go down therefore it wont fill tray. When test button is pressed the arm will rotate down when it turns the tray but then gets stuck in the up ...
Question about Kenmore Refrigerators
...arm is connected but has no effect on the ice maker. If I lift it it will not stay up nor will the motor stop cranking. Any thoughts on what to check for? model 106.74962400 bought January 2005, with ...
Question about Amana Refrigerators
Ice Maker Arm is broken & stuck The arm to control ice production broke where it attaches to the plastic little hole at the back part of the fridge. I looked into replacing that arm, but it looks like
724 questions posted
Usually answered in minutes!
750 Questions
459 Questions
272 Questions
173 Questions
145 Questions