...not working. Boriler works and top of stove works. What should I do ? you need new glow coil for over it may looklike its working glowing orange but it isnt getting hot enough so you neeed replace ...
...hot enough to cook every once in a while, and when we turn it on it smells very strongly of gas. The pilot light is on under the oven. Please help!!! Most of these new fangled gas stove feature a ...
tappan gas stove take long to light then theres a boom serial vf 34501364 you need a new ignitor.. the ignitor isnt getting hot enough to ignite the gas
...my Stoves Newhome GG600 Gas cooker I have a newhome GG600 oven, burner will not open up to full capacity, staying on low flame. It does not get hot enough to do any cooking, please advice many
Question about GE Ovens
...what the cause may be? hi thanks for the question did you replace the ig niter if you did not . replace it the igniter does not get hot enough to ignite the gas replace it thanks the appliance ...
...hot enough and the oven takes a long time to preheat sounds like its wired incorrectly .. the stove operates on two phases of 120 volts each .. together they form a 240 volt supply .. if its wired ...
Question about Ovens
...hot enough. Seems there is not sufficient gas getting to the oven. I replaced the oven control switch recently. Could this be a regulator problem? The product ID is FSK11K3EEA/09-FD9010-034900. call ...
Your gas valve has a thermocouple circuit that will not let gas flow until the ignitor is hot enough. A failed ignitor can still glow but not be hot enough to open the gas valve. Replace your ignitor
hot enough to ignite the little gas that does enter (that is why you may smell gas). It sound like you may need to replace the glowbar (or visually inspect the glowbar to see if it gets red hot. If it
166 questions posted
Usually answered in minutes!
924 Questions
119 Questions
44 Questions