does the microwave heat or cook. Basically it’s dead, and still has power. I’ve read the display board or main control board could be at fault? Check low voltage power supply to the main control board
...main control board is failing. The relays on the board that control the light and fan are closing but the points in the relay are probably burnt and not making contact. You will probably need to ...
...main timer board. A blown fuse or bad connection wont reset by unplugging it. You would need to find a parts dealer who carris Magic Chef parts and give them your model number and ask for price and ...
...main controller board is faulty. Since the logic circuitry is integral to the board, it would require an assembly replacement. On most brands/models, the main controller board is directly behind the ...
Question about Electrolux Microwave Ovens
...board, the main control board or the wiring between them. (The wiring harness can come loose or have a bit of corrosion at the connectors.) The usual recommendation is to check the wiring at the ...
Question about Sanyo Microwave Ovens
...main board or the panel is faulty. To start with you can clean the boards and dry in case you notice these are soiled by insects. If not the board can be faulty and old models are difficult to
Question about Magic Chef Microwave Ovens
...Main control board If your microwave is turning itself on and the interlock switch is still working, the probable cause is the main control board. If the control board is defective it will need to be ...
...main control board is not functioning correctly. many times, the unit will have a separate touch control but, most newer models will have the touch pad integrated together with the main assembly. In ...
...main control board ( it stops every one minute : it has a one minute plus touch ) These are all de codes that a got from de inside of de microwave: Model - R - 8R72 serial 9202003557 FUNTKA 30390112A ...
...main board to set the program and timer. However if the pads are not working then the customer pad, the flexible strip or the main controller board can be faulty that is not making the program ...
99 questions posted
Usually answered in minutes!
196 Questions
167 Questions
59 Questions
47 Questions
42 Questions